Yes, it is possible to edit the equalizer settings to the requirements of any speaker.
For example, the Music Horn Speakers from the CS-Series offer beautiful and clear sound for the Adhān – the prayer call.
RECOMMENDED BY
You just found the perfect solution for your community’s mosque sound system: the all-in-one compact
Digital Mixer Amplifier MX-6224D
TOA’s MX-6224D was designed specifically for mosques – making it the perfect choice for every small and medium sized mosque sound system. Two 240W amplifiers, a mixer with digital sound processor and a built-in effector have been combined to obtain an all-in-one system that best supports your every requirement.
YOUR MOSQUE AMPLIFIER
WATCH THE VIDEO
BENEFITS
Compact all-in-one device
The Digital Mixer Amplifier MX-6224D incorporates a DSP function, a built-in effector, and 2 x 240W class-D amplifiers.
Optimized microphone sensitivity
Microphone sensitivity corresponds to the distance between the microphone and the imam.
Pre-programmed sound effects
Digital effects for microphone inputs. Built-in effector realizes celestial sound even in small mosques. Selectable reverberation out of 12 patterns.
Easy operation
TOA has created the MX-6224D specifically to cater for medium and small houses of worship. The MX-6224D is a reliable and simple system, needing very little technical knowledge to operate, yet still maintains exceptional sound quality.
Superior sound quality
Built-in amplifiers and digital signal processing with pre-set special effects combined with technically matched microphones and speakers comprise perfect sound and voice intelligibility.
Optimize the sound according to your premises
Control the output level meters for inside and outside, reduce feedback with the built-in 3-band equalizer, use the pre-set effects for your voice and for your rooms: delight your congretation with celestrial sound even in small mosques.
POWERFUL AND ECO-FRIENDLY
* compared to an average analogue system
YOUR MOSQUE SOUND SYSTEM
The built-in speaker EQ, optimized for TOA’s TC Series Horn Speaker and BS-1030 Universal Speaker, reduces acoustic feedback and ensures voices are more intelligible. Furthermore, loudspeakers for outside are less vulnerable to damage, thanks to the high-pass filter, and thereby last long time.
Outdoor Speakers
TC Series Reflex Horn Speaker
High durability, heat-resistance, and improved low frequency, thanks to polyamide diaphragm and weatherproof materials.
TH Series Reflex Horns
Shock-resistant aluminum round horn. Superb weatherproofing and corrosion-resistance thanks to the external stainless steel hardware and powder-coated horn and bracket.
TU Series Driver Units
Designed to be used in combination with TOA’s TH-650 or TH-660 Reflex Horns.
Indoor Speakers
BS-1030 B/W
Wall-Mount Box Speakers
High (100V) impedance with 30W of rated output. Easy to install with included bracket. Comes in black (B) or white (W).
Microphones
EM-410
Lavalier Microphone
Electret condenser element with hypercardioid pattern. Works best when attached to the chest area.
DM-1300
Unidirectional Microphone
Dynamic, cost-effective performance.
DM-1500
Unidirectional Microphone
Dynamic, rigidly constructed and minimal handling noise.
DM-880
Dynamic Microphone
Dynamic, cost-effective performance.
System Advantages
Sophisticated options
Make your system easily usable for a single person with the remote control. The speakers are not only proteced by a high-pass filter, they can also be boosted by driver units.
Adjust the system to your needs
The internal and external zones are individually adjustable – allowing for you to set the system up just the way your building requires.
Long-lasting Japanese quality
Japanese engineering brings you high-quality performance and regularly tested products. TOA ensures that products comply with various regulations and standards around the world – so that our customers have complete peace of mind when using our quality products.
Solutions for acoustically difficult environments
TOA developed a software for the simulation of an acoustic setting. The TOA speaker placement viewer allows virtual placement of speakers to plan the setting of a sound system beforehand – so you can be sure that everything actually goes according to your plan.
SYSTEM CONNECTIONS
REFERENCE
See for yourself: How TOA ended a search that lasted for 20 years.
FAQ
RECOMMENDED BY
GET YOUR QUOTATION
TECHNICAL SPECIFICATIONS
| Power Source | 220 V – 240 V AC, 50/60 Hz |
| Power Output | 240 W x 2 channels (100 V, 42 Ω, rated output) |
| Power Consumption | 150 W (according to IEC60065), 650 W (at rated output, both channels) |
| Amplification System | Class D, Output transformerless galvanic isolated output |
| Frequency Response | 50 Hz – 20 kHz, +-3 dB (at 1/3 rated output, rated load, from power amplifier input) |
| Distortion | Less than 1 % THD (at 1 kHz, 1/3 rated output power) |
| Output Regulation | Less than 2 dB no load to full load (at 1 kHz, 1/3 rated output power) |
| Input | MIC 1: –50 dB* (24 V phantom powered)/ –60 dB* (phantom power OFF) 600 Ω, electronically-balanced, ø6.3 mm phone jack |
| MIC 2 – 4: –66 dB*, 200 Ω, electronically-balanced, XLR-3-31 type and ø6.3 mm phone jack (either one usable) | |
| MIC 5 – 6: –60 dB*, 600 Ω, electronically-balanced, XLR-3-31 type and ø6.3 mm phone jack (either one usable) | |
| AUX 1: –10 dB*, 10 kΩ mixed monaural, unbalanced, RCA pin jacks (1 pair) | |
| AUX 2: –20 dB*, 10 kΩ mixed monaural, unbalanced, ø3.5 mm mini jack (3P: stereo) | |
| Power amplifier input: | |
| 0 dB*, 10 kΩ, unbalanced, RCA pin jacks (1 each for ROOM and OUTSIDE outputs) | |
| Output | Speaker output: 2 zones, 100 V (42 Ω), galvanic isolated balanced, M4 screw terminal |
| Recording output: 0 dB*, 600 Ω monaural, unbalanced, RCA pin jacks (1 pair) | |
| Effect bus output: 0 dB*, 600 Ω monaural, unbalanced, RCA pin jacks (1 pair) | |
| Preamplifier output: 0 dB*, 600 Ω monaural, unbalanced, RCA pin jacks (1 each for ROOM and OUTSIDE outputs) | |
| Phantom Power | ON/OFF switchable for MIC 1 and XLR-3-31 type connectors of MIC 2 – 6 |
| Signal to Noise Ratio | 60 dB or less (All volume controls: min.) |
| Controls | 6 Microphone volume controls, 2 AUX volume controls |
| 1 ROOM output switch, 1 ROOM volume control | |
| 1 OUTSIDE output switch, 1 OUTSIDE volume control | |
| 1 Effect control (0 to 100 %) of Effect bus | |
| 1 Effect preset type selection switch (DOME/HALL/DELAY/PLATE) | |
| 1 Effect Room size/Delay time selection switch (OFF/small/middle/large) | |
| 1 Effect output selection switch (ROOM/ROOM+OUTSIDE) | |
| 1 MIC 5 – 6 effect switch | |
| 1 Low EQ control (±15 dB, 80 Hz) for MIC 1 – 6 | |
| 1 Mid EQ control (±15 dB, 2.5 kHz) for MIC 1 – 6 | |
| 1 High EQ control (±15 dB, 12 kHz) for MIC 1 – 6 | |
| 1 Speaker EQ (TC-631M, TC-651M) switch for OUTSIDE output | |
| 1 Speaker EQ (BS-1030B, BS-1030W) switch for ROOM output | |
| 1 Power switch | |
| 1 Phantom switch for MIC 1, 1 Phantom switch for MIC 2 – 6 (XLR-3-31) | |
| Indicators | SLEEP indicator |
| Output Level meters (2 points, –20 dB and 0 dB) for ROOM and OUTSIDE | |
| Protection Indicators for ROOM and OUTSIDE amplifiers | |
| Output indicators for ROOM and OUTSIDE | |
| EFFECT indicator for MIC 1 – 6 | |
| Ventilation | Natural air cooling |
| Ambient Temperature | 0 to 40 ºC (32 to 104 °F) |
| Dimensions | 420 (w) x 99 (h) x 364.8 (d) mm (16.54" x 3.9" x 14.36") |
| Installation Method | Desktop mount, Rack mount with mounting bracket MB-25B (option) |
| Weight | 6.5 kg (14.33 lb) |
| Finish | Front Panel: Aluminum, black, alumite |
| Case: Steal plate, black, paint | |
| * 0 dB = 1 V |